Industrial High-Pressure Spray Washing System | Automated Aqueous Cleaning & Degreasing
360° multi-direction cross spraying, enclosed eco-friendly operation, rapidly remove massive grease and debris in batches.
PRINCIPLE
Place workpieces on the rotating tray. Heated water-based cleaning solution is sprayed out via medium/high-pressure nozzles driven by high-pressure pumps. Combined with physical impact force and chemical dissolving effect, it realizes all-round thorough cleaning.
SOLVING PAIN POINTS
Eliminate odor emission, liquid splashing and environmental pollution caused by traditional open-type manual spraying; meet the demand for high-efficiency automatic cleaning of medium and large-sized workpieces.
Product List/Specifications Comparison
series | Cleaning Basket Diameter | Load-bearing capacity | feature |
JET-T | 600mm-1400mm | 80kg – 400kg | Economical top-opening design saves floor space. |
JET-FE | 762mm | 227kg – 454kg | Front-loading, with safety lock, ergonomically designed for operation. |
JET-F | 1000mm-2200mm | 600kg – 800kg | Heavy-duty front-loading type, featuring a single-chamber multifunctional integrated design, optimized for high-load scenarios. |
ROBOCON | Custom Width | Continuous | Tunnel-conveyor type, suitable for high-frequency assembly line operations. |
Experiential Materials Mechanics Testing
Digital display forward and reverse bending testing machine is used for bending test of metal materials such as bars, plates and rebar for construction. The testing machine is loaded by a bidirectional hydraulic cylinder, and the distance between the support rollers is adjusted by the handwheel and can be self-locking.
Product List
Core Strengths
Precisely arranged nozzles ensure full coverage without dead angles on complex-shaped parts.
这是示例文本，单击 “编辑” 按钮更改此文本。
Cleaning chamber, pipelines, water pumps and cabinet doors are all made of high-strength stainless steel with excellent corrosion resistance.
这是示例文本，单击 “编辑” 按钮更改此文本。
Equipped with standard disc oil skimmer, effectively extend service life of cleaning fluid and cut operating costs.
这是示例文本，单击 “编辑” 按钮更改此文本。
Digitally adjustable cleaning time and temperature, compatible with cleaning processes from plastic parts to heavy-duty metal components.
这是示例文本，单击 “编辑” 按钮更改此文本。
Application Areas
General FAQs
What are the most common cleaning methods used by parts washers?
The three most common cleaning methods used by parts washers are manual cleaning, automated spraying cleaning, and automated ultrasonic cleaning (Immersion Washing).
What scenarios are different cleaning methods suitable for?What scenarios are different cleaning methods suitable for?
Manual cleaning: Typically a sink on a drum style or a vat style design, best suited for low volume cleaning – generally less than 45 minutes per day.
Automated spraying cleaning: Intended for operations where parts are cleaned more than 45 minutes per day. These cabinet-style washers operate like a dishwasher: parts rotate on a turntable while being hit with high pressure spray from various angles to ensure complete cleaning. Our JET-T, JET-FE, JET-F and JET-A series spray parts washers belong to this type.
Automated ultrasonic cleaning (Immersion Washing): With these vat-style units, parts are immersed into a cleaning bath and hit with ultrasonic energy to produce high energy bubbles that vibrate contaminants off surfaces for a high level of clean. This is the preferred method for cleaning blind holes, crevices and smaller parts. Our KER and KT series ultrasonic cleaners belong to this type.
What factors need to be considered when selecting the best cleaning method for an application?
The following five factors should be comprehensively considered:
Material composition of the part to be cleaned
Design of the part(s)
Size of the part(s)
Characteristics of soil that you want to remove
Level of cleanliness required
What types of parts are spray cleaning and immersion cleaning suitable for respectively?
Generally speaking:
If you have a part that has most of its surface(s) exposed and clearly visible with simple shapes, spray washing is usually your best bet
If your part has a complex shape with non-visible surfaces that need to be cleaned, immersion is the better option
Sometimes some or all of these techniques are combined and work together depending on the cleaning requirements of the customer and the shape and composition of the part. That’s why it is very important to choose a professional provider who can provide professional technical consultation and customization services.
What scenarios are top-loading and front-loading spray parts washers suitable for respectively?
Top-loading spray parts washer: Well adapted to wash and degrease small parts quickly by a certain washing pressure. Our JET-T Series is this type
Front-loading spray parts washer: Suitable for medium and big parts continuous and automatic washing, rinsing and drying. Our JET-FE, JET-F and JET-A Series belong to this type
Join Us To Get Free Consultations
We provide reliable cable tray & support systems with strict quality control, customized solutions, complete accessories and on-time delivery. Backed by professional service and international certifications, we are your trusted long-term partner.
